HomeContactPhoneSite Map

GKM College of Engineering and Technology
Counseling Code
1407

Home Page



Publications Patents


research


Patents

GKM College of Engineering & Technology has been emphasizing on Research and Development (R&D) in various areas of engineering through R&D projects funded by the external agencies like DST, AICTE, MNRE.

Sl.No Name of the Student Department Title of the project Status of the Project
1Mr. Gowtham and Mr. HarishMechanical EngineeringBio CementPatent (In Progress)
2Mr. Mukundan.D
Mr. Murali Krishnan.S
Mr. Prem Kumar.B
Mechanical EngineeringGeneration of Power with the help of Sea waves by using Swinging MechanismPatent (In Progress)
3Mr. Shyam SV (II Year)
Mr. Sriram. A (II Year)
Mechanical EngineeringMotor-Generator Couple With RelayPatent (In Progress)
4Mr. Aravindharaj. M (II Year)Mechanical EngineeringMAG-ENGINEPatent (In Progress)
5Mr.R.Santhosh Babu (II Year)
Mr.P.Sashi Kumar (II Year)
Mr.H.Vignesh (II Year)
Mr.I.Sandeep (II Year)
Mechanical EngineeringPersonnel Safety Dress For Workers From Dust Of The Stone CrushersPatent (In Progress)
6Arun Pandian . V.P(IV Year)
Vengadesh .N(IV Year)
EEESmart Blackboard Eraser Using Embedded SystemPatent (In Progress)
7Yonden Lama(IV Year)
Hemant Kumar Tyagi (IV Year)
EEESecured Video Conferencing Using Matrix Based Binary Encoded (Mbbe) Technique Over Surveillance SystemPatent (In Progress)
8G. Sangeetha Barath (IV Year)
S. Muthu (IV Year)
EEEPower Theft Prevention in Distributed System using Smart DevicesPatent (In Progress)
9Vishnu Maya (IV Year)ECERear End Collision Warning In Sharp EndsPatent (In Progress)
10Mr. Paveek Azhagan. AECE (Communication System)Generation of base band signal (Digital Bits) in the receiver section based on received pulsePatent (In Progress)
11Mr. Asghar Khaled (II Year)
Mr. S. Balaji
CSEColour QR CodePatent (In Progress)
12Mr. S. Pradeep SharmaAutomobileCar Cell phone Charger from Engine waste Heat Recovery SystemPatent (In Progress)
13Sameeha (II Year)
Suganya.M (II Year)
Saravan Kumar. M (III Year)
Siva. S (III Year)
Biomedical Engineering, Mechanical EngineeringBioelectricity Production From Human UrinePatent (In Progress)
14Mr. R. Dakshinamurthy (III Year)
Mr. B.R. Akshay Rajkumar (III Year)
Aeronautical EngineeringDrunk and Driving Safety system by using Bio MetricsPatent (In Progress)


  • N.Ramaraj ,“A Proactive Ant Colony Algorithm For Efficient Power Routing using MANT ”, International Journal of Computer Applications, 0975 – 8887 Volume 58 - No. 20, November 2012 .

  • N.Ramaraj, “Theoretical and Numerical Analysis of Electro catalytic processes at Conducting Polymer Modified Electrodes”, International Journal of computer Applications ,0975 – 8887, Volume 44 – No,8,April 2012.

  • Geetha, N.B. and Velraj, R. “Passive cooling techniques of buildings with and without storage system”. Energy Education Science and Technology Part A: Energy Science and Research. Volume (issues) 29(2): pp. 811-844, 2012

  • Geetha, N.B. and Velraj, R. “Parametric analysis of an augmented ventilation system with hot and cold sources using CFD simulation”, International Journal of Green Energy, Energy and Environment. Vol. 1, No. 4, pp. 13-21, 2011.

  • Geetha, N.B. and Velraj, R. “Novel concept of PCM based thermal storage integration in active and passive cooling systems for energy management in buildings”, Energy Engineering Vol.110, Number 1, Jan 2013.

  • Geetha, N.B. and Velraj, R. “Experimental investigation and parametric analysis using CFD simulation for cooling of cabin through augmented ventilation system with passive hot and cold sources”. Presented in ISES Solar World Congress 2011, Kassel, Germany.

  • 6. Geetha, N.B. “Augmenting Natural Ventilation Using Solar Heat and Free Cool Energy for Residential Buildings”, Carbon science and technology (Article in press), 2014. and Velraj, R. “Passive cooling of cabin through natural resources”, Archives Des Sciences, Vol 66, No.5, May 2013.

  • Geetha, N.B. “Augmenting Natural Ventilation Using Solar Heat and Free Cool Energy for Residential Buildings”, Carbon science and technology (Article in press), 2014.

  • Edwin Geo etal ” Experimental Analysis of Biofuel as an Alternative Fuel for Diesel Engine “International Journal of Applied Energy vol-94, 224-231, 2012

  • Edwin Geo etal,” Effects of Biofuel from Fish Oil Industrial Residue – Diesel Blends on Diesel Engine. “International Journal of Energy vol-44, 955-963, 2012

  • Edwin Geo etal,” Assessment of biofuels production from Waste Fish Fat and Utilization in Diesel Engine “International Journal of Applied Energy (Article in press) 2012

  • Edwin Geo etal,” Liquid Hydrocarbon Fuels from Fish Oil Industrial Residues by Catalytic Cracking “International Journal of Energy Research, DOI: 10.1002/er.2906, 2012.

  • Edwin Geo etal,” Effect of Diesel Addition on the performance of Cotton Seed Oil Fuelled DI Diesel Engine “International Journal of Fuel. (Article in press) 2012

  • Edwin Geo etal,” Effect of Free Fatty Acids and Short Chain Alcohols on Conversion of Waste Cooking oil to Biodiesel. “International Journal of Green Energy (Accepted for publication) 2012.

  • Edwin Geo etal,” Single Zone Combustion Modeling of Waste Cooking Oil in Diesel Engine “International Journal of Fuel (Accepted for publication) 2012.

  • Edwin Geo etal,” A Comparative Study of Performance, Emission and Combustion Characteristics of Rubber Seed Oil-Diesel Blends in a D.I Diesel Engine “International Journal of Renewable Energy Technology. Vol: 2, No:3, pp 306-323, 2011.

  • Edwin Geo etal,” Effect of Orange peel Oil Addition on the performance of Cotton Seed Oil Fuelled DI Diesel Engine “International Journal of Energy and Environment. Vol: 2, pp 383-390, 2011

  • S.Mohana Murugan etal,” Emission and combustion characteristics of different fuel in a hcci engine “International Journal of Automotive and Mechanical Engineering, Volume 12, Issue 3, 2011

  • S.Mohana Murugan etal,” Transient State Fuel Injection - A New Concept with Different Fuel Combinations “International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
  • S.Mohana Murugan etal,”Development of In-Line Coldstart Emission Adsorber System (CSEAS) for Reducing Cold Start Emissions in 2 Stroke SI Engine “International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
  • S.Mohana Murugan etal,” Performance Improval and Effective Control of CO,nox, Using Different Fuel Combination in IC Engine “International Journal of the Computer, the Internet and Management, Vol. 19 No. SP1, June, 2011
  • M.Sreenivasan etal,” Behaviour of dissimilar friction welds with the introduction of silver interlayer“,International Journal “Applied Mechanics and Materials “Vol 224(2012) pp 178-183 Doi: 10.4028/AMM.224.178
  • M.Sreenivasan etal,” Alteration of Molecular Weight in the Resin Matrix in Relation to Fade and Wear in a Semi-Metallic Brake Pad “,Int.Journal “ Advanced Science Letters”Volume 13, Number 1, June 2012 , pp. 525-533(9)
  • Sukumar Puhan etal,” Methyl ester of Sal oil as a substitute to diesel fuel- A study on its preparation, performance and emissions in direct injection diesel engine “,Int.Journal _ Industrial crops and products Vol 36,pp 282-288 ( 2012)
  • Sukumar Puhan etal,” Preparation of palm oil biodiesel and effect of various additives on NOx emission reduction in b20: an experimental study “,Int.Journal of Green Energy, Energy and environment Vol. 8, Issue 3. (2011)
  • T.Christo Michael etal.,” “Effect of ovality and variable wall thickness on collapse loads in pipe bends subjected to in-plane bending closing moment” Engineering Fracture Mechanics, 2012, 79, 138–148.

  • T.Christo Michael etal., “Comparison of plastic limit and collapse loads in pipe bends with shape imperfections under in-plane bending and an internal pressure” International Pressure Vessels and Piping, 2012, 99-100, 23–33.

  • T.Christo Michael etal.,” A Study on the Effect of Cross Section Approximation on the behavior of Pipe Bends with Ovality and Thinning” International Journal of Advanced Engineering Sciences and Technologies, 2011, 2(2), 133–139.

  • T.Christo Michael etal.,” Comparison between Elliptic and Semi Elliptic Cross Sections in Pipe Bend with Shape Imperfections” International Journal of Applied Engineering Research, 2011, 6 (7), 881–889.

  • T.Christo Michael etal.,”Effect of cross section on collapse load in pipe bends subjected to in-plane closing moment,” International Journal of Engineering, Science and Technology, 2011, 3(6), 247–256.

  • T.Christo Michael etal.,” Design and Analysis of Mixing Sphere in Start-up System of Supercritical Boilers” International Journal of Applied Research In Mechanical Engineering (IJARME), 2011, 1(2), 37–43.

  • V.Muralidharan, V. Sugumaran “Rough Set Based Rule Learning and Fuzzy Classification of Wavelet Features for Fault Diagnosis of Monoblock Centrifugal Pump” Measurement, Elsevier.

  • V. Muralidharan, V. Sugumaran “SVM Based Wavelet selection for Fault Diagnosis of Monoblock Centrifugal pump” Journal of Computational Systems, Inderscience Publishers.

  • V. Muralidharan, V. Sugumaran “Effect of Feature Selection Algorithms for Fault Diagnosis of Monoblock Centrifugal Pumps” Knowledge-Based Systems, Elsevier.

  • A.Baskar etal,” A simple Model to Optimize general Flow-Shop Scheduling Problems with known Break Down Time and Weights of Jobs “,Int. Journal “Procedia Engineering” vol 38(2012) pp. 191-196.Doi: 10.1016/j.proeng. 2012.06.026

  • A.Baskar etal,” Optimization of Total Material Processing Time in a Manufacturing Flow Shop Environment “,Int.Journal “Advanced Materials Research” vols.622-623(2013) pp 136-141. Doi: 10.4028/ www.scientific.net/AMR.622-623.136

  • M.A.Sai Balaji etal,” Optimization of a NA Semi metallic brake pad formulation with respect to friction and wear”, Int. Journal “ Procedia Engineering” vol 38(2012) pp1650-1657 Doi:10.1016/j.proeng.2012.06.201

  • M.A.Sai Balaji etal,” Thermal and fade aspects of a NA semi metallic Disc brake pad formulation with two different resins “,Int.Journal “ Advanced Materials Research” vols.622-623(2013) pp 1559-1563 Doi:10.4028/AMR.622-623.1559

  • M.A.Sai Balaji etal,” Alteration of Molecular Weight in the Resin Matrix in Relation to Fade and Wear in a Semi-Metallic Brake Pad”, Int.Journal “ Advanced Science Letters” Volume 13, Number 1, June 2012 , pp. 525-533(9)

  • S.P.Rajagopalan, “Analysis of Customer Behavior using Clustering and Association Rules”, Internal Journal of Computer Applications,0975 – 8887, Volume 43 – No,23. April 2012.

  • S.P.Rojagopalan, “ Machine Learning Approach for Process Modeling, Internal Journal of Computer Applications ,0975 – 8887, Volume 57 – No.19, November 2012.

  • S.P.Rajagopalan, “An index based Pattern Matching using Multithreading” , ”, International Journal of computer Applications ,0975 – 8887, Volume 50 – No. 6,July 2012.
  • S.P.Rajagopalan,, “Online Payment – Innovation in Split Tender Payment”, International Journal of Computer Applications ,0975 – 8887 Volume 55 – No.10, October 2012.

  • S.P.Rajagopalan, , “ Payment Gateway - Innovation in Multiple Payments “,,International Journal of Computer Applications ,0975 – 8887 Volume 59 -No. 16, December 2012 .

  • S.P.Rajagopalan, “ Service Based Architecture in Healthcare Domain Using Fingerprint Image Identification”, European Journal of Scientific Research , ISSN 1450 – 216X Vol. 85 No.1, 2012,pp. 105 – 109.

  • S. P. Rajagopalan, “ Study on Feature Selection Techniques in Bio – Informatics “,I.IACSA, International Journal of Advanced computer science and Applications Volume .2,No.1.January 2011

  • S. P. Rajagopalan, “Process Modelling from insurance Event Log”, International Journal of Computer Applications ,0975 – 8887 , Volume 38 - -No. 6, January 2012 .

  • S. P. Rajagopalan, “ A Hybrid Feature Selection Method based in IGSBFS and Naïve Bayes for the Diagnosis of Erythemato squamous Diseases”, International Journal of Computer Applications ,0975 – 8887 , Volume 11 - -No. 7, March 2012 .

  • S. P. Rajagopalan, “ A Model for identification of Length of Longest Common Subsequence by SRLCS”, International Journal of Computer Applications ,0975 – 8887 , Volume 33 - -No. 9, November 2011 .

  • S. P. Rajagopalan, “ A Hybrid SPR Naïve Bayes Algorithm to Select marker genes for detecting Cancer”, International Journal of Emerging trends in Engineering and Development, ISSN 2249- 6149, Issue 2, Vol,2,March- 2012.

  • S. P. Rajagopalan, Heuristic SRLCS Algorithm to determine the Proper alignment strategy for Biosequences “, International Journal of Research and Reviews iin information Technology (IJRRIIT), Vol . 1. No.2.Jine 2011 , ISSN: 2046 – 6501.

  • S. P. Rajagopalan, “ The Expert System Designed To Improve Customer Satisfaction”, Advanced Computing An International Journal ( ACIJ), Vol. 2, No.6. Novemeber 2011.

  • Sankari. C ,” Blocking Hacking Users in Anonym zing Network Using Blacklisting”, Journal of Computer Appllications ISSN: 0974 – 1925 Volume -5 Issue EICA 2012 ,4, February 10, 2012.

  • P. Selvakumar , “ Modeling and Simulation of Multicloud for Many – Task Computing (MTC) Applications”, National Conference on Emerging Trends In Information & Communication – NCETIC’ 12 April 27, 2012..

  • M. Babu, “ Traceback for distributed Denial of service Using IP Address”.Proceeding of International , Computer & Network tics Volume No.2 of 3, March 2012.

  • N. Umapathi etal., “VO2 AODV using ACO For link optimization“ European Journal of Scientific Reaserch vol.76 No.1, Jan 2012, Pp38-44

  • N. Umapathi, etal., A proactive Ant colony algorithm for efficient Power routing using MANET “International Journal Computer Application, vol. 58, No.20, Nov2012

  • N. Umapathi, N. Ramaraj, D. Balasubramaniam, Performance Evaluation of DSR Routing Protocol under Diverging and Converging Nodes, European Journal of Scientific Reaserch, Arcticle in press for Jan 2013 publication

  • L. Balasenthilmurugan, S. Antony, Anbu Raja, S. Deeban Chakravarthy, N. Kanniyappan, Design and Implementation of a Microstrip Band-Stop Filter for Microwave Applications, Procedia Engineering, Volume 38, 2012, Pages 1346-1351

  •   Rames Panda, A Srinivasan , A Statistical Analysis and Modeling of Control Valve Stiction, International Journal of Instrumentation Technology, Jan 2012

  •   Srinivasan Arumugam and Rames C. Panda, Control Valve Stiction Identification, Modelling, Quantification and Control - A Review, Sensors & Transducers Journal, Vol. 132, Issue 9, September 2011, pp.14-24

  • C. Rajeswari, P. Maheswaravenkatesh, Decision Threshold Control Method for the Optical Receiver of a WDM PON using PSO,  International Journal of Computer Applications 35(7):32-34, December 2011

  • D. Nedumaran, D. Balasubramaniam, R. Gurumurugan, Study of Virtual Instrumentation concepts for the Development of Real-Time Phonocardiogram System for research and clinical use, International Conference on Intelligent System and Data Processing (ICISD 2011), 24 - 25 January, 2011, pp. 270-276

  •   N. Kanniyappan, Dr. R. Indira Gandhi, “Design and Analysis of Microstrip Patch Antenna Feeding Techniques”, IEEE proceedings of International Conference on Computational Intelligence and Computing Research’2011

  • K.Jamuna and K.S.Swarup,”Multi-Objective biogeography based optimization for optimal meter placement”,Applied soft Computing ,Elsevier Publishers, Vol 12,may 2012,PP.1503-1510.

  • K.Jamuna and K.S.Swarup,”Optimal placement of PMU and SCADA measurements for security constrained state estimation’, International journal Electric Power and energy Systems, Elsevier Publishers,vol.33,no.10,Dec 2011,pp.1658-1665.

  • K.Jamuna and K.S.Swarup,” Biogeography based optimization for optimal meter placement for security constrained state estimation “, Swarm and Evolutionary Computation, Elsevier Publishers, vol.1, no.2, June 2011, pp.89-96.

  • K.Jamuna and K.S.Swarup,” Contingency constrained optimal meter placement for power system observably using biogeography based optimization “,International journal Machine Learning and Computing.Vol.1,no.1,April 2011,pp 86-92

  • K.Jamuna and K.S.Swarup,” Hybrid state estimator with SCADA and PMU measurements”, the journal of CPRI, vol.8, no.4, Dec .2012.

  • Albino D J and Nambi I M, 2010. Partial characterization of biosurfactant produced under anaerobic conditions by Pseudomonas sp. ANBIOSURF-1. Advanced Materials Research, 93-94, 623

  • Albino D J and Nambi I M, 2009. Effect of biosurfactants on the effect of PCE and TCE. Journal of environmental science and health: Part A, 44(14), 1565-73

  • Albino, D.J. and I.M. Nambi. Anaerobic biosurfactant production for remediation of groundwater contaminated with chlorinated solvents. Green Remediation Conference, Jun 11-13, Amherst, Massachusetts, USA.

  • Albino D J and Nambi I M, Production of biosurfactants under anaerobic condition and simultaneous biodegradation of tetrachloroethylene. January 5-7, 2010, An International Perspective on Current & Future State of Water Resources & the Environment, EWRI-ASCE, IIT Madras, Chennai,

  •   Albino, D.J. and I.M. Nambi. Partial characterization of biosurfactant produced under anaerobic conditions by Pseudomonas sp ANBIOSURF-1. Functionalised and Sensing Materials, Dec. 7-9, 2010, Bangkok, Thailand.

  • Albino, D.J. and I.M. Nambi. Optimization of biosurfactant production by Pseudomonas sp (MTCC 10032) under anaerobic condition. Water Harvesting Storage and Conservation, Nov. 23-25, 2009, Kanpur, India (Poster Presentation).

  • Nambi, I M, Albino D J and Jadhav S. Saline water Intrusion and Upconing during pumping from Coastal Collector Well. Water Harvesting Storage and Conservation, Nov. 23-25, 2009, Kanpur, India (Poster Presentation).

  • Albino, D.J. and I.M. Nambi. A novel process for insitu remediation of subsurface environments contaminated with organic solvents. 7th International Symposium on Southeast Asian Water Environment, Oct. 28-30, 2009, Bangkok, Thailand.

  •   Albino, D J and Nambi I M. The role of substrates in biodegradation of Tetrachloroethylene. International Conference on Emerging Technologies in Environmental Science an Engineering, 26-28 October , 2009, Aligarh Muslim University, Aligarh, India.

  •   S.Fouzul Hidhaya etal.,” Deployment of reverse proxy for the invigilation of SQL injection attacks using input-data Cleansing algorithm”, International journal cryptography and information security ,volume 2,number 4,PP-67-81,Dec 2012.

  • S.Fouzul Hidhaya etal.,” Intrusion protection against SQL injection and scripting attacks using reverse proxy “,communication in computer and information science springa Proc International conference on recent trends in computer networks and distributed systems security ,Vol 335/2012,PP 252-263

  • A.Suresh Kumar etal.”Optimization of Rounded Spike on hypersonic fore body Reattachment.”, Emerging Trends in Science, Enggineering and Technology proceedings of international conference, the COSET 2012 ,pp 459-471 DOI:10.1007/978-81-322-1007-8-42.

  • Mohamed Bak . K, KalaiChelvan. K “Fatigue damage mechanisms in Fiber reinforced Al2 O3 particle hybrid composite laminate’ Springer Proceedings, Lecture notes on Mechanical Engineering, INCOST 2012.

  • Mohamed Bak . K, KalaiChelvan. K” Parametric study of Bonded, Riveted and Hybrid joints using FEA” has been published in Journal of Applied Science, Volume:12 (10),1058-1062,2012. (Impact Factor:0.25)

  • Mohamed Bak . K, “Experimental Investigation and CFD analysis of Missile with Grid fin in subsonic flow” has been published in the International Journal of Engineering Science and Technology. Vol (10) 2010.

  • Mohamed Bak. K, KalaiChelvan. K “Finite Element analysis of hybrid composite joints” has been published in the National Journal of Future Engineering and Technology, i-manager’s Journal on Future Engineering & Technology, Vol. 6 (2), November 2010 - January 2011.

  • Mohamed Bak . K, KalaiChelvan. K, Sridhar B.T.N “Acoustic emission technique on effect of adhesive thickness of single lap joints in composite laminate” was published in International conference on AMPC, Volume: 1, Pp; 246-256, Anna University, Chennai, 2013.

  • Mohamed Bak. K, KalaiChelvan. K “Processing and mechanical characterization of GFRP specimens” was published in International conference on AMP, organized by R.M.K Engineering College, Chennai, 2011.

  • A paper titled that “Parametric study of Bonded, Riveted and Hybrid composite joints using FEA” was published in International conference on IMS, organized by SASTRA University, 2012.

  • Mohamed Bak . K, KalaiChelvan. K “Identification of Failure modes on adhesively bonded joints of composite laminate using AE” was published in International conference on INCRAME, organized by Dr.M.G.R University, 2012.

  • Mohamed Bak . K, KalaiChelvan. K “Experimental and numerical work on fatigue behavior of hybrid composites under reversed cyclic loading” was published in International conference on INCRAME, organized by Dr.M.G.R University, 2012.

  • Mohamed Bak . K, KalaiChelvan. K “Finite Element Analysis of Hybrid Composite Joints “was published in National conference on RIPE, organized by MIT Campus, Anna University, 2010.

  • Mohamed Bak . K, KalaiChelvan. K “Fabrication and testing of Hybrid composite plate using Microwave oscillator “was published in National conference on RTME organized by SRR Engg College, Chennai,2012.

  • Mohamed Bak . K, KalaiChelvan. K “Identification of failure modes on Single and Double layer of GFRP using Acoustic Emission Data” was published in National conference on RAMM, organized by Velammal Engineering College, Chennai, 2013.

  • “Classical Lean Management for Aviation Industry”, was presented in International Conference jointly conducted by DRDO, ISI and Quality Council of India, on 7th & 8th February 2011.

  • “Implementation of Six Sigma in Aviation Induatry”, was presented in International Conference jointly conducted by DRDO, ISI and Quality Council of India, on 7th & 8th February 2011

  • Leansy Tools for Aviation Industry was presented in a National Conference, at Vellammal Engineering College, Chennai, on 23rd March 2011.

  • Quality Assurance system for achieving Global Quality”, was presented in National Conference on Challenges in Achieving Global Quality – CAGQ 2004, at Thiagarajar College Engineering, Madurai, on 24th & 25th May 2004, and won Second Best Paper award of the conference.

  • R.S.Muralidharan and V.Ramasamy,(2013),”Development of light Weight Concrete” International Conference on Innovative materials and Construction-ICIMC-13”,8th,9th of mar 2013,Page No 1-10.

  • K.Sivasami etal,” Performance and emission characteristics of a marine diesel engine using biodiesel.”, Vol, European journal of scientific research, Nov 2012 PP: 613 – 620

  • Niresh Fatima Abubacker and R. Indira Gandhi, “an extended METHOD FOR RECOGNITION OF BROKEN TYPEWRITTEN CHARACTERS – SPECIAL REFERENCE TO Tamil script”, IEEE conference on Open Systems - ICOS 2011, Sep 25-28, 2011, Langkawi - Malaysia, Accepted publications
  • Niresh Fatima Abubacker and R. Indira Gandhi, “A Novel Approach for Standard Structural Feature Extraction for Character Recognition – Special Reference to Distorted Characters”, 2nd International conference on Business and Economic Research - ICBER 2011, March 14-16 March 2011, Langkawi Kedah, Malaysia, Received Best Paper Award,

  • S.Peyarajan and R. Indira Gandhi, “ On-Line Tamil Hand Written Characters Recognition Using Kohonen Neural Network, Research Journal of Computer Systems and Engineering ( RJCSE) ISSN 2230-8653, e-ISSN 2230-857, 2011.

  • R. Indira Gandhi and Niresh Fatima Abubacker , “ A Novel Approach for Standard Structural Features Extraction for Character Recognition – Special Reference to Distorted Characters”, in the conference Proceeding 2nd International conference on Business and Economic Research - ICBER, ISBN 978-967-5705-02-01, PP 2704-2713, 2011.

  • R. Indira Gandhi and Dr.K. Iyakutti, “Restoring Distorted Documents by Combining NNKSOM with ICA and DFDM”, International Journal of Image and Video Processing (IJIVP), ISSN 0976-9099, Vol 1, No 3, pp.134-139, 2011.

  • R. Indira Gandhi and Niresh Fatima Abubacker , “ An Approach for Structural Features Extraction for Distorted Tamil Character Recognition”, in International Journal of Computer Applications (IJCA 0975-8887), Vol 22, No4, pp 24-28, 2011.

  • Suresh Babu G.N.K. and S.K.Srivatsa, “Increasing Success of Software Projects through minimizing Risks”, International Journal of Research and Reviews in Software Engineering, Vol.1, No.1, pp 18-22, 2011

  • Suresh Babu G.N.K. and S.K.Srivatsa, “Design and Implementation of Web Prefetching Solution”, International Journal of Engineering and Technology, Vol.2, No.1, pp 99 - 102 , 2012

  • P.Raja, R.Arasu, D.Karthik” Consumers’ Perception on Matching Quality of Celebrity and Brand Features in Advertisement”, International Journal of Research in Computer Application & Management, Vol.1 Issue No. 1,pp. 88-91, Mar 2011,Issn No. 2231-1009
  • P.Raja etal.,” Factors Influencing to Buy the Goods in the Consumer Co-operative Stores in Dindigual District” College Sadhana, Vol.3, No.2,pp. 211-216, Feb, 2011, Issn No.0974-6838.

  • P.Raja, Revathi Pandian, N.Mahesh”, Woman Entrepreneurship through SHGs in Tamil Nadu,India”, Journal of Economic and Business, Vol 16, No. 1,pp. 65-72, April 2011,Issn No. 0853-862X

  • P.Raja , .R.Arasu, D.Karthik” FPLP (Fourth Party Logistics Provider) – An Emerging Logistics Management Model”, Journal of Commerce & Management Thought, Vol. 2,Issue No. 3,pp. 441-450, July-Sept 2011, ISSN No: 0975-623X

  • P.Raja , N.Mahesh ,” Repeat Purchase Behavior of Customers at Supermarket”, SHARE Journal of Multidisciplinary Research and Studies, Volume 3, Issue 1, 33-38, Jan-Mar 2012,Issn No. 0976-4712.

  • P.Raja, P.Kannan, G.Arivu selvam,” Socio Economic Stipulation of the Consumers of Flavored Milk”, Research in Management and Technology, Vol.1. No.2, 52-58, Dec 2011, ISSN: 2249-9563.

  • P.Raja etal.,” Social Responsibility - IT, Banking, Pharmaceutical Sectors”, International Journal of Social Sciences and Interdisciplinary Research , Vol No. 4, 84-88, April, 2012, ISSN No: 2277-3630.

  • P.Raja, R.Arasu, Mujeebur” Potentiality of Online Sales and Customer Relationships”, International Journal of Innovation, Management and Technology, Vol. 3, No. 1,pp. 30-34, Feb 2012, ISSN No: 2010-0248.

  • S Chitra Devi K J Renuka Mr J Anand,” A study on Safety and Health provision that act as a drive force for the Employees in manufacturing sectors “,International Journals of Multidisciplinary Research Academy,2012,Volume(II),PP.No 130(1),ISSN No.2249-5894

  • K J Renuka , C Deepan,” A Study on stress level of BPO employees in the Organisation”, International Conference “Competency Building Strategies” in business and technology,2012 Volume II, PP.No 754-747

  •   S Chitra Devi K J Renuka ,Ms E Latha,” A Study on stress level of BPO employees in the Organisation”, International Conference“Opportunities & Challenges in the Current Global Business Scenario,2011,Volume I, PP.No 9-14

  •    S Chitra Devi K J Renuka ,” Factors that affects the Women Entrepreneurs in small scale sector”, International Journal of Enterprise and innovation management Studies,2011,Volume II(1) PP.No 11-14,ISSN.No.0976-2698.

  •    P.Jegatheeswari , “Absenteeism study about Aavin Employees”- with special reference to Madurai district”, International Journal of Applied Management June20,2011 Volume 3.PP.No.318-322 ,ISSN No. 09748709.

  • P.Jegaheeswari Ganagavel,” Evaluation of Training Procedure of Orizen for Fresher’s”, International Journal of Applied Management, June 2011, Volume 3.PP.No.388-391 ,ISSN No. 09748709.

  •    P.Jegatheeswari,” The impact to Quality Circle in Employee Involvement and Employee Engagement”, SMART Journal of Business Management Studies, July -Dec 2011, Volume 7.PP.No.82-87 ,ISSN No. 09731598.

  • Santhosh Kumar “A Study on Consumer Switching Behaviour in Cellular Service Provider: with reference to Chennai”, Far East Journal of Psychology and Business,Volume 2.

  •    Anand.J B.Arokiaraj,"Analyze the customer effectiveness through online advertisement", International Journal of Research in IT, Management and Engineering, ISSN.No 2249- 1619

  • Anand.J ,"The Effective Provisions of welfare Measures for Employees in IT sector and their impact on higher Productivity and QWL", International Journal of Research in IT, Management & Engineering, ISSN.No 2249- 1619

  • Anand.J ,“A study on Safety and Health provision that act as a drive force for the Employees in manufacturing sectors”, International Journals of Multidisciplinary Research Academy, ISSN NO.2249-5894.

  •   Anand.J , “Corporate social responsibility managing issues for human resources department in IT sector”, International Journal of Exclusive Management Research,ISSN.NO.2249-8672.

  •    Anand.J,” International conference on competency building strategies in business & technology”, The Effective provisions of safety, health measures for employees in manufacturing sector acts as drive force for productivity & commitment ISSN.NO. 8192176436

  • Anand.J,” International conference on Quality Management system”, Talent Management in IT sect

  • V.Dhanalakshmi Sridevi etal.,”Performance of Mixture of Vegetable waste with high carbohydrate content in anaerobic digestion process “International journal of Environmental Science, Volume 3,no1,2012.

  • V.Dhanalakshmi Sridevi etal.,”Studies on conversion of carbohydrate content in the mixture of vegetable waste into biogas in a single stage Anaerobic Reactor, “Research journal of chemical science.” Volume02,pp 66-71 June(2012).

  • V.Dhanalakshmi Sridevi etal.,” Biogas generation in a vegetable waste Anaerobic digester An analytical approach, “Research journal of recent sciences, volume -1(3), 41-47, March (2012).

  • R.Komalavalli etal.,” Photo catalytic degradation of chloropyrifos, endosulphon, imidocloprid and quinolphos by Nano crystalline Tio2-a kinetic study with pH and Mass effect “,Nanoscience and Nanotechnology,2011,1(1), 1-5

  • R.Komalavalli etal.,” Photocatalyic degradation of imidocloprid and quinophos by nano crystalline Tio2-a kinetic study with pH and mass effects” ICIRAM -2012,SAS, VIT University, Vellore, Tamilnadu, India.

  • R.Komalavalli etal.,” Nano Tio2 Assisted Degradation of textile Dyes in H2o2 Aqueous solution : Kinetic studies with PH and Mass Effects “, Chem Sci Trans, 2012, 1(3),522-529

  • D.Sivraj etal.,On some generalized Open sets,J.Adv.Res.Appl.Maths”.,Vol 3,Issue.4,2011,PP.1-11

  • D.Sivraj etal., Note On separated subsets of GTS,Bull. Allahabad Math.soc. 26(1)(2011),35-45

  • D.Sivraj etal., Sequential Convergence in generalized topological Spaces, J.Adv.Res.Pure Maths .Vol.3, Issue.1, 2011, PP.111-122

  • D.Sivraj etal.,”Generalized nets in generalized topological spaces,J.Adv.Res.Pure Maths.,Vol 3,Issue 2,2011,PP. 49-55.

  • D.Sivraj etal.,”LATTICE OF GENERALIZED TOPOLOGIES, Acta Math.Hunger, 133(4) (2011), 365-371

  • D.Sivraj etal.,”More on ?-Interior in Generalized Topological Spaces, Journal of Advanced Studies in Toplogy,Vol.2,No.2,2011,26-30

  • D.Sivraj etal.,” On T-9 –Open sets and *-extremely disconnected spaces,Kochi J.Maths.,7(2012),17-33

  • D.Sivraj etal., Some separation axioms in generalized topological spaces, BOl.Soc.Paran.Mat.(3s.)v.31(1)(2013):29-42

  • V.Thamarai Selvi etal., On Weak structures of C saszar,Acta Mathematica Hungarica,137(3)2012,224-229.

  • Michael Scudder etal. “Science Fiction Films” Indian Association for Science Fiction Studies, 19-21 Jan, 2012

  • M.Michael Scudder etal, “Use of Multimedia Technology in English language Teaching”, ENGLISH TO DAY 4th July 2012

  • M.Michael Scudder etal”, The problem of Teaching English” Journal of Online Learning and Teaching, 26th Sep 2012